› LiDAR Assisted Control: A bankable benefit for Wind Energy Resource Assessment? - Peter Stuart, Renewable Energy Systems Ltd
13:30-14:15 (45min)
› Wind Resource Assessment in the Age of Wind Turbine and Plant Controls - Andy Clifton, WindForS
14:15-14:45 (30min)
› Applications of wind lidars, from resource assessment to turbine performance measurement and control - Christopher Slinger, ZephIR Ltd
14:45-15:15 (30min)
› Statistics on wind turbine wake interaction through scanning lidar measurements - Sandrine Aubrun-Sanches, École Centrale de Nantes
15:45-16:15 (30min)
› Relevance of site assessment data for optimizing Lidar-assisted control of wind turbines - Matthieu Boquet, LEOSPHERE France
16:15-16:45 (30min)
› Aerodynamic modelling of flow control; results from the EU project AVATAR - Gerard Schepers, TNO-ECN
08:45-09:30 (45min)
› Overview of Research Activities on Plasma-Enhanced Wind Energy Concepts at TU Delft - Ricardo Pereira, Instituto Superior Técnico, Universidade Técnica de Lisboa, Faculty of Aerospace Engineering [Delft]
09:30-09:55 (25min)
› Experimental lift control using plasma actuators on a wind turbine blade - Annie Leroy, Laboratoire pluridisciplinaire de recherche en ingénierie des systèmes, mécanique et énergétique
09:55-10:15 (20min)
› Experimental lift control using fluidic jets on a model wind turbine - Sophie BALERIOLA, Laboratoire PRISME
10:15-10:35 (20min)
› Control of lift fluctuations on wind turbine airfoil. closed loop control implementation - Dominique Nelson-Gruel, Laboratoire PRISME
11:00-11:25 (25min)
› Experiments on lift dynamics and feedback control of a wind turbine blade section - Caroline Braud, École Centrale de Nantes
11:25-11:50 (25min)
› Towards robust control design for active flow control on wind turbine blades, first results based on numerical simulations - Dimitri Peaucelle, Laboratoire dánalyse et dárchitecture des systèmes [Toulouse]
11:50-12:15 (25min)
› Active closed-loop control of nonlinear flows of an open cavity geometry - Charles Poussot-Vassal, ONERA
12:15-12:40 (25min)
› Introduction to Lidar-Assisted Control - David Schlipf, Universität Stuttgart [Stuttgart]
13:40-14:20 (40min)
› Incoming wind field reconstruction from nacelle LiDAR measurements - Fabrice Guillemin, IFP Energies nouvelles
14:20-14:45 (25min)
› Turbine loads and production optimization through LiDAR assisted wind turbine control - Domenico Di Domenico, IFP Energies Nouvelles
14:45-15:10 (25min)
› Robust nonlinear control of floating wind turbines - results and performance analysis - Franck Plestan, Ecole centrale de nantes
15:10-15:35 (25min)
› E-penon sensors to detect flow separation over aerodynamic surfaces - Antoine Soulier, École Centrale de Nantes
15:50-16:15 (25min)
› Development of an AeroElastic Harvester - Sylvain COSTA, Institut PPRIME - UPR3346
16:15-16:40 (25min)
› Improvement of Darrieus turbines using the constant-circulation paradigm - Chatellier Ludovic, Institut PPRIME - UPR3346
16:40-17:05 (25min)
› Using flexible blades to improve wind turbine performance - Vincent Cognet, École doctorale Physique en Ile de France, Physique et mécanique des milieux hétérogenes, Paris Sciences et Lettres
17:05-17:30 (25min)
› Wind farm controls research at NREL - Paul Fleming, National Renewable Energy Laboratory
08:45-09:30 (45min)
› Optimization of wind farm power production using an axial-induction control strategy: field test results - Thomas Duc, Engie Green
09:30-10:00 (30min)
› Experimental analysis of the wake behaviour during yaw variation imposed through wind farm control strategies - Stefano Macri, Laboratoire pluridisciplinaire de recherche en ingénierie des systèmes, mécanique et énergétique
10:00-10:30 (30min)
› Farm Control : Interest and Activities in DTU Wind - Tuhfe Göçmen, Danish Technical University
11:00-11:45 (45min)
› Wind farm production strategies evaluation with enhanced steady state models - Frédéric Blondel, IFP Energies nouvelles
11:45-12:15 (30min)
› Large eddy simulations at rotor and farm scales - Maud Moens, Université catholique de Louvain/Institute of Mechanics, Materials and Civil Engineering of Louvain-la-Neuve
12:15-12:45 (30min)
Reception room
